b.On the front panel or remote control, press ENTER. Then press the left/right arrow buttons 
to select a media. Using the mouse, click the device settings box.
6.Select the time range date.
a.On the front panel or remote control, press the up/down arrow buttons 
to highlight Time Range Date, and then press ENTER. Using the mouse, click a month settings box. The settings box changes color.
b.On the front panel or remote control, press the left/right arrow buttons 
to highlight a start date settings box: month, day, or year, and then press ENTER. Using the mouse, click the settings box. The settings box changes color.
c.On the front panel or remote control, press the left/right arrow buttons 
to display the desired setting, and then press ENTER. Using the mouse, right- or
d.If applicable, repeat steps 6b and 6c to select the remaining parts of the Time Range Start date.
7.Repeat the procedure in steps 6a through 6c to select the Time Range Start time.
8.Repeat the same procedure to select the Time Range End time. The Time Range End cannot be the same as the Time Range Start.
9.Verify the backup media has sufficient space.
a.On the front panel or remote control, press the up/down arrow buttons 
to highlight Estimate Size, and press ENTER. Using the mouse, click Estimate Size. The system displays the size estimation dialog box.
Figure 87. Estimated Disk Storage
b.On the front panel or remote control press ENTER. Using the mouse, click OK.
10.Start the backup.
a.On the front panel or remote control, press the up/down arrow buttons 
to highlight Start Backup, and press ENTER. Using the mouse, click Start Backup. The “Would you like to start backup dialog” box opens.
b.On the front panel or remote control, press the left/right arrow buttons 
to highlight OK, and then press ENTER. Using the mouse, click OK. The backup process starts (no backup status information is displayed).
c.To view the backup status indicator, on the front panel or remote control, press MENU/ESC. Using the mouse, click Exit. If new settings are made, the “Configuration data is changed.” dialog box is displayed. Otherwise, the system exits to the Live View mode.
d.If the “Configuration data is changed.” dialog box is displayed, press the left/right arrow buttons 
on the front panel or remote control to highlight OK, and then press ENTER. Using the mouse, click OK. The system returns to the Live View mode. The backup status indicator is displayed and two messages appear (refer to Figure 88).
Figure 88. Backup Status Indicators
After the backup process is complete, the system displays the “Backup completed.” dialog box.
e.On the front panel or remote control, press ENTER. Using the mouse, click OK.
86 |
|
