Siemens S5-135U/155U appendix Inserting CPUs and coordinator in the central controller

Multiprocessor Operation/Coordinators

You wish to mask out the four communication flag areas with the highest addresses on COR C:

		Address F200H to F27FH
		Activated (Jumper Inserted)
		Address F280H to F2FFH
		Masked Out (Jumper Open)
	8	1
	EP 60
	9	16
	Figure 6-4	Example of Addressing the Communication Memory on COR C
Step 3	Inserting CPUs and coordinator in the central controller:
	S Precondition: The central controller is not yet switched off.

Substep

Action

Reaction

3a

3b

3c

Insert the CPUs and coordinator in the relevant slots.

Insert all EPROM or RAM sub- modules in the CPUs according to the configuration. The EPROM submodules must have been previously programmed with a PG.

Set all mode switches on the CPUs and on the coordinator to STOP.

none

none

none

6-8	System Manual
	C79000-G8576-C199-06