Siemens S5-135U/155U appendix 19 6ES5 482-4UA11 Digital Input/Output Module, Inputs, Outputs

Digital Input/Output Modules

8.4.196ES5 482-4UA11 Digital Input/Output Module

Rated supply voltage L+

Rated input voltage

24 V DC

24 V DC

Inputs

Number of inputs

Isolation

Input voltage

for logic 0 for logic 1

16 min., 24 max.

Yes, 1 group of 32 inputs/outputs

±33 to 5 V 13 to 33 V

Rated input current	8.5 mA typical
Delay time	0.3 ms typical
Input resistance	2.8 kilohms typical
Coincidence factor (total load capability)	100 %
Permissible line length	50 m max.
Supply voltage for 2-wire BERO	22 V to 33 V
Power supply
Digital section from system bus	5 V, 80 mA typical
Outputs
Number of outputs	8 min., 16 max., short-circuit protected 1)
Isolation	Yes
Fusing	6.3 A slow;
	1 fuse per 8 outputs
Output voltage
for logic 1	L+ ± 1.5 V min.
for logic 0	3 V max.
Switching current
(resistive, inductive load)	5 mA to 0.5 A
Switching frequency
with resistive load	120 Hz max.
with inductive load	2 Hz max. at 0.3 A; 0.5 Hz max. at 0.5 A
Breaking voltage (inductive)	Limited to L+ and ± 27 V
Total switching current	4 A max. per 8 outputs
Coincidence factor (total load capability)
ventilated	100 %
not ventilated	50 %; 100 % up to 35 oC
Permissible line length	400 m max.
Current consumption from L+/L±	24 V, 150 mA typical
Short-circuit monitoring
Indicator for signaling output (H+)	Red LED for every 8 outputs
Output voltage referred to L± (with feed at 1L+)
for logic 1	1L+ ± 5 V min.
for logic 0	3 V max.
Switching current	10 mA max. current limiting
Enable input (F+/F±)	Jumper in front connector
Voltage test to VDE 0160	Between group and ground point: 1250 V AC
Mechanicalspecifications

Dimensions (W x H x D)

Weight

20 mm x 255 mm x 195 mm

Approx. 0.4 kg

1)Short-circuit protection responds at line resistance v 15 ohms

System Manual	8-69
C79000-G8576-C199-06