■Error code 9F
No Paper
Reload paper, then press Start.
Paper empty
User Check
• Replenish the paper in the paper tray.
Step | Cause | Remedy | |
|
|
| |
|
|
| |
1 | Dirt on PE sensor | Clean the PE sensor. | |
|
|
| |
2 | Harness connection failure of PE | Check the harness connection of the PE | |
EG sensor PCB ASSY. | EG sensor PCB ASSY and reconnect it. | ||
| |||
|
|
| |
3 | PE actuator catching on some | Correct catching of the PE actuator. | |
position |
| ||
|
| ||
|
|
| |
| PE sensor failure | Check the sensor performance following | |
4 |
| the procedure described in “Maintenance | |
| mode 32”. If any problem occurs, replace | ||
|
| ||
|
| the PE PG sensor PCB ASSY. | |
|
|
| |
5 | HVPS PCB unit failure | Replace the HVPS PCB unit. | |
|
|
| |
6 | Main PCB failure | Replace the main PCB ASSY. | |
|
|
|
■Error code A1
Cover is Open
Close the Front Cover.
Front cover open
User Check
• Close the front cover perfectly.
Step | Cause | Remedy |
|
|
|
|
|
|
| Front cover interlock switch failure | Check the sensor performance following |
1 |
| the procedure described in “Maintenance |
| mode 32”. If any problem occurs, replace | |
|
| |
|
| the front cover interlock switch ASSY. |
|
|
|
| Harness connection failure of front | Check the harness connection of the front |
2 | cover interlock switch ASSY | cover interlock switch ASSY and reconnect |
|
| it. |
|
|
|
| Part pressing the front cover | Replace the front door main or front door |
3 | interlock switch is broken, which is | unit ASSY. |
provided at the left side of the front |
| |
|
| |
| cover inside. |
|
|
|
|
4 | Relay front PCB failure | Replace the relay front PCB ASSY. |
|
|
|
5 | Main PCB failure | Replace the main PCB ASSY. |
|
|
|
Confidential |