8.TROUBLESHOOTING OF THE COMMUNICATIONS ERRORS
If a communications error occurs, the facsimile equipment
(1)Gives the alarm (intermittent bleep) for approximately four seconds.
(2)Indicates the appropriate error message on the LCD.
(3)Prints the transmission report during fax transmission.
■Definition of error codes on the communications list
(1)CallingCode 1 | Code 2 | Causes |
|
|
|
10 | 08 | Wrong number called. |
|
|
|
11 | 01 | No dial tone detected before start of dialing. |
|
|
|
11 | 02 | Busy tone detected before dialing. |
|
|
|
11 | 03 | 2nd dial tone not detected. |
|
|
|
11 | 05 | No loop current detected. * |
|
|
|
11 | 06 | Busy tone detected after dialing or called. |
|
|
|
11 | 07 | No response from the remote station in sending. |
|
|
|
11 | 10 | Unobtainable tone detected after dialing. |
|
|
|
|
|
|
17 | 07 | No response from the calling station in receiving. |
|
|
|
|
|
|
* Available in German models only.
Confidential |