■Error code 8A
Jam Tray 1
Remove the jammed paper from Tray 1.
Paper jam (Tray 1)
Error code 8B
Jam Tray 2
Remove the jammed paper from Tray 2.
Paper jam (Tray 2)
Error code 8C
Jam MP Tray
Remove the jammed paper from Multi Purpose Tray and press Start.
Paper jam (MP tray)
User Check
•Check if the paper is jammed in the appropriate tray. If jammed, remove it.
•Adjust the paper guide corresponding to the paper size.
•Check if too much paper is loaded in the tray.
Step | Cause | Remedy | |
|
|
| |
1 | Dirt on edge sensor | Clean the edge sensor. | |
|
|
| |
| Harness connection failure of | Check the harness connection of the | |
2 | registration front sensor PCB | registration front sensor PCB ASSY in the | |
| ASSY | appropriate tray, and reconnect it. | |
|
|
| |
3 | Paper feeding kit worn out | Replace the paper feeding kit of the | |
(MP/ T1/ T2) | appropriate tray. | ||
| |||
|
|
| |
| Registration front sensor PCB | (MP/ T1) Check the sensor performance | |
| failure (MP/ T1/T2) | following the procedure described in | |
|
| “Maintenance mode 32”. If any problem | |
4 |
| occurs, replace the front door unit ASSY. | |
|
| ||
|
| procedure described in “Maintenance | |
|
| mode 32”. If any problem occurs, replace | |
|
| the LT paper feed frame unit. | |
|
|
| |
5 | Main PCB failure | Replace the main PCB ASSY. | |
|
|
|
Confidential |