(3)Press the [Stop/Exit] button. The machine beeps for one second and returns to the initial stage of the maintenance mode.
Note:
•If you have opened and closed the front cover during the above procedure, you need to open and close the front cover again upon completion of the procedure.
■Location of sensors
Document front sensor 1
Switch back sensor
ADF unit
Document cover sensor
Document rear sensor
HP sensor 
Frame L
Paper eject sensor
(Relay rear PCB) 
DX tray sensor 
New toner sensor (Relay front PCB)
Front cover sensor
Toner sensor PCB (Light reception)
Regist rear sensor |
|
Regist front sensor |
Fig.
Document front sensor 2
Regist frame
Toner LED PCB (Light emission)
Frame R
MP PE sensor
PE EG sensor
PE sensor
Edge sensor
Confidential |