<WSW04>
Selector No. | Function |
| Setting and Specifications | |||
|
|
|
|
|
| |
1 | Earth function in transfer facility | 0: Provided | 1: Not provided | |||
(Not used.) | ||||||
|
|
|
|
| ||
|
|
|
|
|
| |
|
| No. 2 | 3 |
|
| |
2 | Dual tone detection frequency in | 0 | 0: 350 and 440 Hz (A) | |||
0 | 1: 440 and 480 Hz (B) | |||||
| ||||||
3 | ICM recording (Not used.) | |||||
1 | 0: 480 and 620 Hz (C) | |||||
| ||||||
|
| |||||
|
| 1 | 1: 480 and 620 Hz (C) | |||
|
|
|
|
|
| |
4 | Dual tone detection sensitivity in | 0: Normal | 1: High | |||
ICM recording (Not used.) | ||||||
|
|
|
|
| ||
|
|
|
|
|
| |
| Length of time added to time |
|
|
|
| |
| designated by selectors 3 and 4 |
|
|
|
| |
5 | on the WSW 24 (time between | 0: Not added | 1: +4 seconds added | |||
| CML ON and pseudo ring |
|
|
|
| |
| backtone return). |
|
|
|
| |
|
|
|
|
|
| |
|
| No. 6 | 7 | 8 |
| |
|
| 0 | 0 | 0: 80 ms | ||
6 |
| 0 | 0 | 1: 100 ms | ||
| 0 | 1 | 0: 110 ms | |||
| Break time length for flash | |||||
I | 0 | 1 | 1: 120 ms | |||
function | ||||||
| 1 | 0 | 0: 200 ms | |||
8 |
| |||||
| 1 | 0 | 1: 250 ms | |||
|
| |||||
|
| 1 | 1 | 0: 500 ms | ||
|
| 1 | 1 | 1: 700 ms | ||
|
|
|
|
|
| |
Note:
•Selectors 1 and 5 through 8 are not applicable in those countries where no transfer facility is supported.
•Selectors 6 and 8: Break time length for flash function
These selectors set the break time length. This setting is effective only when the flash function is selected for the [Search/Speed Dial] button by using the function switch.
App. | Confidential |