Brother DCP-8080DN/8085DN, MFC-8480DN/8880DN/8890DW manual 466

<WSW26>

Selector No.	Function		Setting and Specifications
1	Not used.
2
	Dialing during document reading
3	into the temporary memory in in-	0: Disable		1: Enable
	memory message transmission
		In the case of Selector 3=0 in WSW54.
		No. 4	5
		0	0: 0.5	(A)
	No. of CNG cycles to be detected	0	1: 1	(B)
		1	0: 1.5	(C)
4	(when the line is connected via
		1	1: 2	(D)
	the external telephone except in
5		In the case of Selector 3=1 in WSW54.
	the external TAD mode or via the
		No. 4	5
	built-in telephone)
		0	0: 2.5	(A)
		0	1: 3	(B)
		1	0: 3.5	(C)
		1	1: 4	(D)
		In the case of Selector 6=0 in WSW58.
		No. 6	7
	No. of CNG cycles to be detected	0	0: 0.5	(A)
		0	1: 1	(B)
	(when the line is connected via
		1	0: 1.5	(C)
6	the external telephone in the
		1	1: 2	(D)
	external TAD mode, via the built-
7		In the case of Selector 6=1 in WSW58.
	in telephone in the TAD mode, or
		No. 6	7
	via the machine in the automatic
		0	0: 2.5	(A)
	reception of the F/T mode)
		0	1: 3	(B)
		1	0: 3.5	(C)
		1	1: 4	(D)

8Not used.

•Selector 3: Dialing during document reading into the temporary memory in in- memory message transmission

If this selector is set to "0," the machine waits for document reading into the memory to complete and then starts dialing. This enables the machine to list the total number of pages in the header of the facsimile message.

•Selectors 4 and 5:No. of CNG cycles to be detected (when the line is connected via the external telephone except in the external TAD mode or via the built-in telephone)

The machine interprets a CNG as an effective signal if it detects the CNG by the number of cycles specified by these selectors when the line is connected via the external telephone except in the external TAD mode or via the built-in telephone.

App. 1-32 Confidential