■Error code 58

Fuser Error

Turn the power off, then on again. Leave the machine for 15 min.

Fuser unit failure

Error code 59

Self-Diagnostic

Will Automatically Restart within 15 minutes.

Fuser unit failure (Detect fuser failure at start-up)

User Check

• Turn off the power switch, and turn on the power switch again 15 minutes later.

This operation will melt the fuser unit if the heater is hot.

Leave the machine for 15 minutes and perform it after cooling down sufficiently.

Step

Cause

Remedy

 

 

 

 

 

 

1

Fuser unit failure

Replace the fuser unit.

 

 

 

2

Main PCB failure

Replace the main PCB ASSY.

 

 

 

■Error code 63

Replace Toner

Open the Top Cover, replace Toner Cartridge.

Replace toner or Toner life end

User Check

• Replace the toner cartridge with a new one.

Step

Cause

Remedy

 

 

 

1

Toner sensor PCB ASSY failure

Replace the toner sensor PCB ASSY.

 

 

 

2

Relay front PCB ASSY failure

Replace the relay front PCB ASSY.

 

 

 

3

Main PCB failure

Replace the main PCB ASSY.

 

 

 

■Error code 67

Toner Low

Toner of the toner cartridge is low

User Check

• Prepare the toner cartridge with a new one.

3-17

Confidential