Brother DCP-8080DN/8085DN, MFC-8480DN/8880DN/8890DW manual 435

FIRMWARE SWITCHES (WSW)

This appendix describes the functions of the Worker switches, which can be divided into two groups: one is for customizing preferences designed for the shipping destination (Refer to "4.18 EEPROM Customizing (Function code 74)" in Chapter 7) and the other is for modifying preferences that match the machine to the environmental conditions. Use the latter group if the machine malfunctions due to mismatching.

Each switch has eight selectors. However, some of them cannot be set by an end user. Only selectors in the worker switch setting tables of this Appendix that are shaded can be set by an end user.

The worker switch setting procedure is described in "4.6.1 Firmware switch setting (Function code 10)" in Chapter 7.

■Worker Switch

WSW No.	Function	Refer to:
WSW01	Dial pulse setting	App. 1-4
WSW02	Tone signal setting	App. 1-6
WSW03	PABX mode setting	App. 1-7
WSW04	Transfer facility setting	App. 1-9
WSW05	1st dial tone and busy tone detection	App. 1-10
WSW06	[Redial/Pause] button setting and 2nd dial tone detection	App. 1-11
WSW07	Dial tone setting 1	App. 1-13
WSW08	Dial tone setting 2	App. 1-14
WSW09	Protocol definition 1	App. 1-15
WSW10	Protocol definition 2	App. 1-16
WSW11	Busy tone setting	App. 1-17
WSW12	Signal detection condition setting	App. 1-18
WSW13	Modem setting	App. 1-19
WSW14	AUTO ANS facility setting	App. 1-20
WSW15	Redial facility setting	App. 1-21
WSW16	Function setting 1	App. 1-22
WSW17	Function setting 2	App. 1-23
WSW18	Function setting 3	App. 1-24
WSW19	Transmission speed setting	App. 1-25
WSW20	Overseas communications mode setting	App. 1-26
WSW21	TAD setting 1	App. 1-27
WSW22	ECM and call waiting caller ID	App. 1-28
WSW23	Communications setting	App. 1-29
WSW24	TAD setting 2	App. 1-30
WSW25	TAD setting 3	App. 1-31
WSW26	Function setting 4	App. 1-32
WSW27	Function setting 5	App. 1-34
WSW28	Function setting 6	App. 1-35
WSW29	Function setting 7	App. 1-36

App. 1-1 Confidential