(3)Disconnect the connector of the Backlight module harness from the Panel PCB ASSY.
(4)Unlock the lock, and remove the LCD cable from the Panel PCB ASSY.
Note:
•After disconnecting flat cable(s), check that each cable is not damaged at its end or
•When connecting flat cable(s), do not insert them at an angle. After insertion, check that the cables are not at an angle.
LCD cable
Backlight module harness
Panel PCB ASSY
LCD cable
Panel PCB ASSY
Lock
Fig.
(5)Release the four Hooks, lift up the Panel PCB ASSY to the direction of the arrow 5a and remove the Panel PCB ASSY.
Panel PCB ASSY
5b
5a4a
Panel unit generic 
Hooks
Hooks
Fig.
Confidential |