9.81PS PCB Unit

(1)Turn the Printer upside down.

(2)Remove the Screw pan (S/P washer) M3.5x7.5SR, and remove the NCU FG harness.

(3)Remove the five bind B M4x12 Taptite screws, and then remove the Base plate LV.

(4)Remove the Screw pan (S/P washer) M3.5x7.5SR from the Base plate LV to remove the PS PCB unit terminal.

Screw pan (S/P washer) M3.5x6

Taptite bind B M4x12

NCU FG harmess

Base plate LV

<Back side>

PS PCB unit terminal

Screw pan (S/P washer) M3.5x6

Fig. 5-166

Assembling Note:

•When assembling the Base plate LV, Direct the cable side of the PS PCB unit terminal to the backward, and align parallel the PS PCB unit terminal with the side of the Base plate LV.

5-124

Confidential