Brother DCP-8080DN/8085DN, MFC-8480DN/8880DN/8890DW manual 147

■Paper jam in the ADF

<User Check>

- Check whether length does not use paper equal to or less than 148 mm.

Step	Cause	Check	Result	Remedy
1	Foreign object	Is there a foreign object	Yes	Remove the foreign
	inside ADF	inside ADF?		object.
	Document rear	Does the document rear		Re-assembly the
2	actuator catching	actuator move smoothly?	No	document rear actuator.
	on some position
3	Flap A catching on	Does the flap A move	No	Re-assembly the flap A.
	some position	smoothly?
4	LF4 film catching	Does the LF4 film move	No	Replace the LF4 film.
	on some position	smoothly?
	Document rear	Does the document rear		Replace the document
	sensor	sensor move smoothly?		rear sensor.
5	malfunction	(Check it following the	No
		procedure described in
		“Maintenance mode 32”)
6	Feed roller failure	Does the feed roller move	No	Replace the feed roller.
		smoothly? Is it damaged?

■Paper jam in the paper eject section

Step	Cause	Check	Result	Remedy
1	Foreign object	Is there a foreign object	Yes	Remove the foreign
	around paper eject	around paper eject?		object.
	Pinch roller	Is the pinch roller of the		Re-assembly the pinch
2	malfunction	eject roller attached to the	No	roller.
		eject roller?
	Eject roller failure	Does the eject roller		Replace the eject roller.
3		move smoothly? Is it	No
		damaged?

3-75 Confidential