(30) Catch the Pins of the Outer chute onto the Back cover, and close the Back cover.
30b
Pin
Back cover
Pin | Outer chute ASSY |
|
30a
Back cover
Fig.
Set the following parts after assembling.
•Set the DX feed ASSY or DX blank cover.
•Install the Drum/toner ASSY into the Printer.
•Put the Paper into the Paper tray.
•Reset the count of the Fuser unit and Laser unit after part replacement. (Refer to "5.1 Resetting the Periodical Replacement Parts Life" in Chapter7.)
Confidential |