(8) Remove the bind B M3x10 Taptite screw, and remove the Safety louver.

Frame R

Safety louver

Taptite, bind B M3x10

Fig. 5-169

(9)Remove the Inlet harness ASSY from the SW holder.

(10)Press the Hooks on both sides of the Power supply switch, pull out the Power supply switch to the direction of 10a and pull the wire out of the groove on the SW holder.

Inlet harness ASSY

SW holder

9

10b 10a

Wire

Hook

Power supply switch

Hook

Fig. 5-170

Assembling Note:

•When assembling the power supply switch onto the SW holder, give attention to the direction of the switch.

•Align the “ I ” of the power supply switch with the “ I ” of the SW holder to attach the power supply switch

5-126

Confidential