(17) Connect the connectors of the Photo interrupter and FFC cable into the Main PCB.
Note :
•When connecting flat cable(s), do not insert them at an angle. After insertion, check that the cables are not at an angle.
(18)Connect the connector of the Scanner motor harness into the Driver PCB.
Driver PCB
Driver PCB 
Scanner motor harness 
FFC cable |
|
Photo interrupter |
|
Main PCB | Main PCB |
Fig.
(19) Connect the six connectors of the each harness into the Main PCB.
Driver PCB 
NCU harness
Battery harness
Speaker harness |
|
Driver harness |
|
Main PCB | USB HOST |
| harness ASSY |
Panel PCB harness | Main PCB |
|
Fig.
Confidential |