<Function>
This function is to move the scanning unit in position for transportation located at the right end.
When you fix the FAX equipment and check its operation, you need to perform this function right before packing and shipping it.
Note:
•Please instruct end users to perform this function if possible before packing and shipping their FAX equipment to a sales agent or a service dealer for the purpose of repair. (For the procedure to allow users to perform maintenance modes, please see Section 3..)
<Operating Procedure>
(1)Press the [0] and [6] keys in this order in the initial stage of the maintenance mode. The CCD unit moves to the designated position for transportation located at the right end. The "MAINTENANCE 06" is displayed until the CCD unit is placed in position. When the CCD unit is placed in the position, the "PLEASE SCAN LOCK" appears on the LCD.
(2)Open the document cover, and lock the scanner lock lever at the rear left of the scanner unit. When the scanner lock lever is locked, the "SCAN LOCKED" appears.
To terminate this operation, press the [Stop/Exit] button. The machine returns to the initial stage of the maintenance mode. The scanning operation cannot operate after this operation until switch OFF/ON or the "Function 99" is performed.
4.4ADF Performance Test (Function code 08)<Function>
The machine counts the documents fed by the automatic document feeder (ADF) and displays the count on the LCD for checking the ADF performance.
<Operating Procedure>
(1)Set documents. (Allowable up to the ADF capacity.) The "DOC. READY" will appear on the LCD.
(2)Press the [0] and [8] keys in this order.
Press the [
] or [
] buttons so that the "[
]: DX, [
]: SX" is displayed on the LCD. While counting the documents, the machine feeds them in and out, displaying the current count on the LCD as shown below.
ADF CHECK P.01
Current count (1st page in this example)
(3)To return the machine to the initial stage of the maintenance mode, press the [Stop/Exit] button.
Confidential |