Brother DCP-8080DN/8085DN, MFC-8480DN/8880DN/8890DW 4.6Firmware Switch Setting and Printout, 4.6.1Firmware switch setting (Function code 10)

4.6Firmware Switch Setting and Printout4.6.1Firmware switch setting (Function code 10)

<Function>

The machine incorporates the following firmware switch functions which may be activated with the procedures using the control panel keys and buttons.

The firmware switches have been set at the factory in conformity to the communications standards and codes of each country. Do not disturb them unless necessary. Some firmware switches may not be applicable in some versions. The firmware switch data list indicates "Not used." for those inapplicable switches.

■Firmware Switches (WSW01 through WSW74)

WSW No.	Function	Refer to:
WSW01	Dial pulse setting	App. 1-4
WSW02	Tone signal setting	App. 1-6
WSW03	PABX mode setting	App. 1-7
WSW04	TRANSFER facility setting	App. 1-9
WSW05	1st dial tone and busy tone detection	App. 1-10
WSW06	Redial/Pause button setting and 2nd dial tone detection	App. 1-11
WSW07	Dial tone setting 1	App. 1-13
WSW08	Dial tone setting 2	App. 1-14
WSW09	Protocol definition 1	App. 1-15
WSW10	Protocol definition 2	App. 1-16
WSW11	Busy tone setting	App. 1-17
WSW12	Signal detection condition setting	App. 1-18
WSW13	Modem setting	App. 1-19
WSW14	AUTO ANS facility setting	App. 1-20
WSW15	REDIAL facility setting	App. 1-21
WSW16	Function setting 1	App. 1-22
WSW17	Function setting 2	App. 1-23
WSW18	Function setting 3	App. 1-24
WSW19	Transmission speed setting	App. 1-25
WSW20	Overseas communications mode setting	App. 1-26
WSW21	TAD setting 1	App. 1-27
WSW22	ECM and call waiting caller ID	App. 1-28
WSW23	Communications setting	App. 1-29
WSW24	TAD setting 2	App. 1-30
WSW25	TAD setting 3	App. 1-31
WSW26	Function setting 4	App. 1-32
WSW27	Function setting 5	App. 1-34
WSW28	Function setting 6	App. 1-35
WSW29	Function setting 7	App. 1-36
WSW30	Function setting 8	App. 1-37
WSW31	Function setting 9	App. 1-38
WSW32	Function setting 10	App. 1-39

7-10 Confidential