(1)Disconnect the 7 connectors (for the model supporting the DX tray only) or 3 connectors (for the model supporting no DX tray only) from the ADF relay PCB.
(2)Disconnect the connector of the ADF motor harness from the ADF motor.
(3)Remove the cup S M3x8 Taptite screw and ADF FG harness.
ADF motor harness
| 2 |
|
ADF motor |
| 1 |
|
| |
Taptite cup S M3x8 |
| |
| ADF FG harness |
|
<Back side> | ADF relay PCB |
|
|
| |
| S/B solenoid ASSY |
|
| (for the models with the DX only) | |
Switch back sensor |
| |
(for the models with the DX only) | Document rear sensor | |
Document front sensor 2
(for the models with the DX only) 
Document front sensor 1
ADF relay PCB
ADF relay harness PF solenoid ASSY
(for the models with the DX only)
Fig.
(4) Turn the Document cover LGL upside down and remove the cup B M3x10 Taptite screw.
Taptite, cup B M3x10
Document cover LGL
Fig.
Confidential |