<Operating Procedure>
(1)Press the [1] and [0] keys in this order in the initial stage of the maintenance mode. The machine displays the "WSW00" on the LCD and becomes ready to accept a firmware switch number.
(2)Enter the desired number from the firmware switch numbers (01 through 53). The following appears on the LCD:
Selector 1 Selector 8
WSWXX = 0 0 0 0 0 0 0 0
(3)Enter a value to be set (0 or 1) using the [0] and [1] keys.
(4)Press the [OK] button. This operation saves the newly entered selector values onto the EEPROM and readies the machine for accepting a firmware switch number.
(5)Repeat steps (2) through (5) until the modification for the desired firmware switches is completed.
(6)Press the [Stop/Exit] button to return the machine to the initial stage of the maintenance mode.
Note:
•To cancel this operation and return the machine to the initial stage of the maintenance mode during the above procedure, press the [Stop/Exit] button.
•If there is a pause of more than one minute after a
■Details of Firmware Switches
•The details of the firmware switches are described in APPENDIX 4 in which the user- accessible selectors of the firmware switches are shaded.
•Machine w/o fax support some selectors of firmware switches. Those selector numbers are circled.
Confidential |