Cisco Systems 2.5 Connection: Ethernet for IRB

6-5
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter6 Edit Interface/Connection
Connection: Ethernet for IRB
Connection: Ethernet for IRB
This dialog box contains the following fields if you chose Ethe rnet for IRB in
the Configure list.
Current Bridge Group/Associated BVI
These read-only fields contain the current bridge group value and the current
Bridge-Group Virtual Interface (BVI) name.
Create a new Bridge Group/Join an existing Bridge Group
Choose whether you want to make this interface a member of a new bridge gro up,
or if you want to join an existing bridge group. If you want to crea te a new bridge
group, enter a number in the range 1 to 255. If you want to have the interface join
an existing bridge group, choose the BVI interface that is already a member of that
group.
IP Address
Enter the IP address and subnet mask in the fields provided.
Dynamic DNS
Enable dynamic DNS if you want to update your DNS servers automatically
whenever the WAN interface IP address changes.
Note This feature appears only if supported by the Cisco IOS release on your router.
To choose a dynamic DNS method to use, do one of the following:
•Enter the name of an existing dynamic DNS method.
Enter the name in the Dynamic DNS Method field exactly as it appears in the
list in Configure > Additional Tasks > Dynamic DNS Methods.
•Choose an existing dynamic DNS method from a list.
Click the drop-down menu and choose an existing method. A window with a
list of existing dynamic DNS methods opens. This menu choice is available
only if there are existing dynamic DNS methods.