5-19
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter5 Configuring WAN Connections
Configuring a DSL Connection
Field Reference
Table 5 -14 describes the fields in this screen.
Cisco IOS Default Values
The values shown in the following table are Cisco IOS defaults. Cisco SDM will
not overwrite these values if they have been changed during a prior configuration,
but if your router has not been previously configured, these are the values that will
be used
Table5-14 PVC Fields
Element Description
VPI Enter the VPI value obtained from your service provider or system
administrator. The virtual path identifier (VPI) is used in ATM
switching and routing to identify the path used for a number of
connections. Enter the VPI value given to you by your service
provider.
VCI Enter the VCI value obtained from your service provider or system
administrator. The virtual circuit identifier (VCI) is used in ATM
switching and routing to identify a particular connection within a
path that it may share with other connections. Enter the VCI value
given to you by your service provider.
Connection Type Parameter Value
ADSL •Operating mode •Auto
G.SHDSL •Operating mode
•Line rate
•Equipment type
•Annex A (United States)
•Auto
•CPE
ADSL over
ISDN
•Operating mode •Auto