12-21
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter12 Easy VPN Remote
Administering Easy VPN Remote Connections
Mode Either client or network extension. In client mode, the VPN
concentrator or server assigns a single IP address to all traffic
coming from the router; devices outside the LAN have no direct
access to devices on the LAN. In network extension mode, the VPN
concentrator or server does not substitute IP addresses, and it
presents a full routable network to the peers on the other end of the
VPN connection.
Details
Choose an Easy VPN Remote connection from the list to see the values of the following settings for
that connection.
Authentication Digital certificates or preshared key. The preshared key option
shows the user group sharing the key.
Outside Interface This is the interface that connects to the Easy VPN server or
concentrator.
Inside Interfaces These are the inside interfaces included in this Easy VPN
connection. All hosts connected to these interfaces are part of the
VPN.
Easy VPN Server The names or IP addresses of the Easy VPN servers or
concentrators. If the Cisco IOS image on your router supports Easy
VPN Remote Phase III, you can identify two Easy VPN servers or
concentrators during configuration using Cisco SDM.
Multiple Subnet Support The addresses of subnets which are not directly connected to the
router but which are allowed to use the tunnel. An ACL defines the
subnets allowed to use the tunnel.
Table12-7 Edit Easy VPN Remote Fields
Element Description