Cisco Systems 2.5 Configure DSL Controller

6-35
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter6 Edit Interface/Connection
Configure DSL Controller
Configure DSL Controller
Cisco SDM supports the configuration of the Cisco WIC-1SHDSL-V2. This WIC
supports TI, E1, or a G.SHDSL connection over an ATM interface. Cisco SDM
only supports a G.SHDSL connection using the ATM interface. This window lets
you set the controller mode on the WIC to ATM, enabling a G.SHDSL connection,
and lets you create or edit DSL controller information for the G.SHDSL
connection.
Controller Mode
Cisco SDM supports only ATM mode, which provides for a G.SHDSL
connection, on this controller. This field will automatically be set to ATM mode
when the OK button is clicked.
Equipment Type
Choose whether your connection terminates at the central office (CO) or your
customer premises equipment (CPE).
Operating Mode
Choose whether the DSL connection should use Annex A signaling (for DSL
connections in the United States) or Annex B signaling (for DSL connections in
Europe).
Line Mode
Choose whether this is a 2-wire or 4-wire G.SHDSL connection.
Line Number
Choose the interface number on which the connection will be made.