15-19
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter15 DMVPN
How Do I Configure a DMVPN Manually?
Use original next hop— If this is a DMVPN hub router, EIGRP will advertise
this router as the next hop. Check this box to have EIGRP use the original IP next
hop when advertising routes to the DMVPN spoke routers.
How Do I Configure a DMVPN Manually?
You can configure your router as a DMVPN hub or spoke using the VPN
Components windows and the Edit Dynamic Multipoint VPN (DMVPN) window.
In order to do so you need to complete the following tasks:
Configure an IPSec profile. You cannot configure a DMVPN connection until
you have configured at least one IPSec profile.
Configure the DMVPN connection.
Specify the networks you want to advertise to the DMVPN cloud.
Procedures for these tasks are given below:

To configure an IPSec Profile:

You need to configure an IPSec policy, and then configure a DMVPN tunnel.
Step1 Click VPN in the left panel, and then click VPN Components.
Step2 Click the IPSec Profiles branch, and then click Add in the IPSec Profiles window.
Step3 Name the profile, and select the transform sets it is to contain in the Add an IPSec
profile window. You can enter a short description if you want to.
Step4 Click OK.

To configure a DMVPN connection:

Step1 In the VPN tree, click the Dynamic Multipoint VPN branch.
Step2 Click Edit Dynamic Multipoint VPN (DMVPN).
Step3 Click Add.