Cisco Systems 2.5 Rule Category, Preview

32-17
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter32 ACL Editor
Rules Windows
Rule Category
Select the rule category that you want to select from. The rules in the category you
select will appear in the box below the list. If no rules appear i n the box, no rules
of that category have been defined.
Name/Number
The name or number of the rule.
Used By
How the rule is being used. For example, if the rule has been associated with an
interface, the name of the interface. If the rule is being used in an IPSec policy,
the name of the policy. Or, if the rule has been used by NAT, this column contains
the value NAT.
Description
A description of the rule.
Preview
This area of the screen displays the entries of the selected rule.
Action
Either Permit or Deny. See Meanings of the Permit and Deny Keywords to learn
more about the action of Permit and the action of Deny in the context of a specific
type of rule.
Source
The source IP address criteria that the traffic must match. This column may
contain the following:
•An IP address and wildcard mask. The IP address specifies a network, and the
wildcard mask specifies how much of the rule’s IP address the IP address in
the packet must match.
•The keyword any. Any indicates that the source IP address can be any IP
address
•A host name.