Cisco Systems 2.5 802.1x Authentication on Layer 3 Interfaces

4-9
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter4 802.1x Authentication
802.1x Authentication on Layer 3 Interfaces
Delete
Click Delete to remove a chosen client from the exception list.
802.1x Authentication on Layer 3 Interfaces
This window allows you to configure 802.1x authentication on a Layer 3
Interface. It lists Ethernet ports and VLAN interfaces that have or can be
configured with 802.1x authentication, allows you to choose a Virtual Template
interface for untrusted clients, and create an exception list for clients to bypass
802.1x authentication.
Note If policies have been set using the CLI, they will appear as read-only information
in this window. In this case, only enabling or disabling 802.1x is allowed in this
window.
Prerequisite Tasks
If a prerequisite task appears in the window, it must be completed before 802.1x
authentication can be configured. A message explaining the prere quisite task is
displayed, along with a link to the window where the task ca n be completed.
Enable 802.1x Authentication Globally
Check Enable 802.1x Authentication Globally to enable 802.1x authentication
on all Ethernet ports.
Interfaces Table
The Interfaces table has the following columns:
Interface—Displays the name of the Ethernet or VLAN interface.
802.1x Authentication—Indicates whether 802.1x authentication is enabled for
the Ethernet port.