Chapter5 Configuring WAN Connections
Configuring an Ethernet WAN Connection
5-2
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Step4 In the Create Connection tab, click Ethernet WAN.
Step5 Click Create Connection to start the wizard. The wizard Welcome screen
describes the tasks you will complete.
Step6 Click Next to go to the subsequent screens to configure the connection.
Step7 Cisco SDM displays the Summary screen when you have completed the
configuration. Review the configuration. If you need to make changes, click Back
to return to the screen in which you need to make changes, then return to the
Summary screen.
Step8 If you want to test the connection after sending the configuration to the router,
check Test the connectivity after configuring. After you click Finish, Cisco
SDM tests the connection and displays the test results in another screen.
Step9 To send the configuration to the router, click Finish.
The Ethernet WAN Connection Reference describes the screens that Cisco SDM
displays.
Ethernet WAN Connection Reference
•WAN Wizard Interface Welcome Window
•Select Interface
•Encapsulation: PPPoE
•IP Address: Ethernet without PPPoE
•IP Address: ATM or Ethernet with PPPoE/PPPoA
•Authentication
•Advanced Options
•Summary

WAN Wizard Interface Welcome Window

This window lists the types of connections you can configure for this interface
using Cisco SDM. If you need to configure another type of connection for this
interface, you can do so using the CLI.