Cisco Systems 2.5 Logging Page

24-31
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter24 Security Audit
Logging Page
Logging Page
This screen lets you configure the router log by creating a list of syslog servers
where log messages will be forwarded, and by setting the logging level, which
determines the minimum severity a log message must have in order for it to be
captured.
IP Address/Hostname Table
This table displays a list of hosts to where the router log messages will be
forwarded. These hosts should be syslog servers that can trap and ma nage the
router log messages.
Add... Button
Click this button to display the IP Address/Host Name screen, letting you add a
syslog server to the list by entering either its IP address or host name.
Edit... Button
Click a syslog server in the table to select it, and click this button to display the
IP Address/Host Name screen, letting you edit the IP address or host name of the
selected syslog server.
Delete Button
Click a syslog server in the table to select it, and click this button to delete the
selected syslog server from the table.
Set logging level Field
In this field, select the minimum severity level that a router log message must have
in order for it to be trapped and forwarded to the syslog server(s) in the table on
this screen. A log message severity level is shown as a number from 1 through 7,
with lower numbers indicating more severe events. The descriptions of each of the
severity levels are as follows:
– 0 - emergencies
System unusable
– 1- alerts