Cisco Systems 2.5 Add or Edit EIGRP Route

25-7
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter25 Routing
Add or Edit EIGRP Route
Add or Edit EIGRP Route
Use this window to add or delete an Extended IGRP (EIGRP) ro ute.
Autonomous System Number
The autonomous system number is used to identify the router’s EIGRP routing
process to other routers.
IP Network List
Enter the networks that you want to create routes to. Click Add to add a network.
Click Delete to delete a network from the list.
Available Interface List
The available interfaces are shown in this list.
Make Interface Passive
Check the box next to the interface if you do not want it to send updates to its
neighbor. The interface will neither send nor receive routing updates.
Caution When you make an interface passive, EIGRP suppresses the exchange of hello
packets between routers, resulting in the loss of their neighbor relationship. This
not only stops routing updates from being advertised, but also suppresses
incoming routing updates.
Add
Click Add to add a destination network IP address to the Network list.
Delete
Select an IP address, and click Delete to re mov e an IP a ddr ess from the Network
list.