Cisco Systems 2.5 Edit IPS: SEAP Configuration: Target Value Rating

Chapter27 Cisco IOS IPS
Edit IPS
27-28
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Edit IPS: SEAP Configuration: Target Value Rating
The target value rating (TVR) is a user-defined value that represents the user’s
perceived value of the target host. This allows the user to increase the risk of an
event associated with a critical system and to de-emphasize the risk of an event
on a low-value target.
Use the buttons to the right of the Target Value Rating and Target IP Address
columns to add, remove, and edit target entries. Click Select All to highlight all
target value ratings automatically. Click Add to display a dialog in which you can
create a new TVR entry. Click Edit to change the IP address information for an
entry.
Target Value Rating Column
Targets can be rated as High, Low, Medium, Mission Critical, or No Value. Once
a target entry has been created, the rating cannot be changed. If you need to
change the rating, you must delete the target entry and recreate it using the rating
that you want.
Target IP Address Column
The target IP address can be a single IP address or a range of IP addresses. The
following example shows two entries. One is a single IP address entry and the
other is an address range.
Apply Changes
When you have entered the information that you want in the Target Value Rating
window, click Apply Changes. The Apply Changes button is disabled when
there are no changes to send to the router.
Target Value Rating Target IP Address
High 192.168.33.2
Medium 10.10.3.1-10.10.3.55