Cisco Systems 2.5 Configuring SSH and HTTPS

Chapter8 Create Firewall
Advanced Firewall Configuration Wizard
8-14
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Step3 If no outside interface has a static IP address, select one and click Edit to display
a dialog that allows you to reconfigure the IP address information for the
interface.
If there is anoutside interface with a static IP address, note that interface name and
complete the next procedure.
Configuring SSH and HTTPS
Complete the following steps to configure a management policy for SSH and
HTTPS on the router.
Step1 Click Configure > Additional Tasks > Router Access > Management Access.
Step2 If there is no management policy, click Add. If you want to edit an existing
management policy, select the policy and click Edit.
Note If you are editing a management policy it must be associated with an interface that
has a static IP address.
Step3 In the displayed dialog, enter the address information in the Source Host/Network
box. The IP address information that you enter must include the IP address of the
PC you will use to manage the router.
Step4 Choose an outside interface with a static IP address in the Management Interface
box. This interface must have a route to the IP address you specified in the Source
Host/Network box.
Step5 In the Management Protocols box, check Allow SDM.
Step6 Check HTTPS and SSH to allow those protocols.
Step7 Click OK to close the dialog.
Step8 Click Apply Changes in the window that displays management access policies.