8-21
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter8 Create Firewall
How Do I...
Step1 From the left frame, select Additional Tasks.
Step2 In the Rules tree, select ACL Edit or and then Access Rules.
Step3 Click Add.
The Add a Rule dialog box appears.
Step4 In the Name/Number field, enter a unique name or number for this rule.
Step5 In the Description field, enter a description of the rule, such as “VPN
Concentrator Traffic.”
Step6 Click Add.
The Add an Extended Rule Entry dialog box appears.
Step7 In the Source Host/Network group, from the Type field, select A Network .
Step8 In the IP Address and Wildcard Mask fields, enter the IP address and network
mask of the VPN source peer.
Step9 In the Destination Host/Network group, from the Type field, select A Network.
Step10 In the IP Address and Wildcard Mask fields, enter the IP address and network
mask of the VPN destination peer.
Step11 In the Protocol and Service group, select TCP.
Step12 In the Source port fields, select =, and enter the port number 1023.
Step13 In the Destination port fields, select =, and enter the port number 1723.
Step14 Click OK.
The new rule entry appears in the Rule Entry list.
Step15 Repeat Step 7 through Step 15, creating rule entries for the following protocols
and, where required, port numbers:
•Protocol IP, IP protocol GRE
•Protocol UDP, Source Port 500, Destination Port 500
•Protocol IP, IP Protocol ESP
•Protocol UDP, Source Port 10000, Destination Port 10000
Step16 Click OK.