Cisco Systems 2.5 How Do I . . .

Chapter26 Network Address Translation
How Do I . . .
26-28
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Type
Choose Interface if you want the Translate from addresses to use the address of
an interface on the router. They will be translated to the address that you specify
in the Interface field, and PAT will be used to distinguish each host on the
network. Choose Address Pool if you want the addresses to be translated to
addresses defined in a configured address pool.
Interface
If you choose Interface in the Type field, this field lists the interfaces on the
router. Choose the interface whose IP address you want the local ins ide addresses
translated to. PAT will be used to distinguish each host on the network.
Address Pool
If you choose Address Pool in the Type field, you can enter the name of a
configured address pool in this field, or you can click Address Pool to choose or
create an address pool.
Configuration Scenarios
Click Dynamic Address Translation Scenarios for examples that illustrate how the
fields in this window are used.
How Do I . . .
This section contains procedures for tasks that the wizard does not help you
complete.
How do I Configure Address Translation for Outside to Inside
The NAT wizard allows you to configure a Network Address Translation (NAT)
rule to translate addresses from inside to outside. To configure a NAT rule to
translate addresses from outside to inside, follow the directions in one of the
following sections:
•Add or Edit Dynamic Address Translation Rule: Outside to Inside
•Add or Edit Static Address Translation Rule: Outside to Inside