Cisco Systems 2.5 IRB Bridge

3-7
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter3 LAN Wizard
IRB Bridge
Launching the Wireless Application
After completing this LAN configuration, do the following to launch the Wireless
Application and complete the bridging configuration.
Step1 Select Wireless Application from the Cisco SDM Tools menu. The Wireless
Application opens in a separate browser window.
Step2 In the Wireless Application, click Wireless Express Security, and then click
Bridging to provide the information to complete the bridging configuration.
IRB Bridge
If you are configuring a VLAN to be part of an IRB bridge, the bridge must be a
member of a bridge group.
To create a new bridge group that this interface will be part of, click Create a new
bridge group and enter a value in the range 1 through 255.
To have this VLAN be a member of an existing bridge group, click Join an
existing bridge group, and select a bridge group.
Note When you complete the bridge configuration in the Wireless Application, you
must use the same bridge group number entered in this scre en.
Field Reference
Table3-8 IP Address and Subnet Mask
Element Description
Create a new bridge
group
To create a new bridge group that this interface will be part of, click Create
a new bridge group and enter a value in the range 1 through 255.
Join an existing bridge
group
To have this VLAN be a member of an existing bridge group, click Join an
existing bridge group, and select a bridge group.