Chapter3 LAN Wizard
LAN Wizard: DHCP Address Pool
3-4
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
LAN Wizard: DHCP Address Pool
This screen lets you configure the DHCP IP address pool. The IP addresses that
the DHCP server assigns are drawn from a common pool that you configure by
specifying the starting IP address in the range, and the ending address in the
range.
For more information, see DHCP Address Pools.
Note If there are discontinuous address pools configured on the r outer, then the
Starting IP and Ending IP address fields will be read-only.
Field Reference
DHCP Options
Use this window to configure DHCP options that will be sent to hosts on the LAN
that are requesting IP addresses from the router. These are not options for the
router that you are configuring; these are parameters that will be sent to the
requesting hosts on the LAN. To set these properties for the router, click
Additional Tasks on the Cisco SDM category bar, click DHCP, and configure
these settings in the DHCP Pools window.
Table3-4 DHCP Address Pool
Element Description
Starting IP Enter the beginning of the range of IP addresses for the DHCP server to use
in assigning addresses to devices on the LAN. This is the lowest-numbered
IP address in the range.
Ending IP Enter the highest-numbered IP address in the range of IP addresses.
DNS Server and WINS
Server Fields
If this window displays DNS Server and WINS Server fields, you can click
DHCP Options for information on them.