Cisco Systems 2.5 WAAS Reference

7-3
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter7 Wide Area Application Services
WAAS Reference
Step10 If necessary, enter the enable command, press Enter, and provide the enable
password.
Step11 At the CiscoIOS command prompt, enter the following commands:
Router(config)# wccp router-list 1 default_gateway
Router(config)# wccp tcp-promiscuous router-list-num 1
Router(config)# wccp version 2
Replace default_gateway with the IP address of the router that provides a route to
the CM.
Step12 In the NM WAAS tab, click Register.
a. Enter the IP address of the WAAS CM.
b. Choose the interface on which you want to send the registration request. The
interface that you choose must have a route to the WAAS CM network.
c. Click OK. Cisco SDM displays a username and password dialog box.
d. Enter the username and password required to login to the CM.
After the router registers with the CM, the blue https link contains the CM IP
address.
Step13 Click on the https link to view the registration status for the Edge WAE on the
router. The CM displays the device registration status as online.
WAAS Reference
The following sections describe the WAAS configuration screens:
•NM WAAS
•Integrated Service Engine
•WCCP
•Central Manager Registration