Cisco Systems 2.5 vty Settings

31-15
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter31 Router Properties
vty Settings
vty Settings
This window displays the virtual terminal (vty) settings on your router. The
Property column contains configured line ranges and configurable properties for
each range. The settings for these properties are contained in the Value column.
This table shows your router vty settings and contains the following columns:
•Line Range—Displays the range of vty connections to which the rest of the
settings in the row apply.
•Input Protocols Allowed—Shows the protocols configured for input. Can be
Telne t, SSH, or both Telnet and SSH.
•Output Protocols Allowed—Shows the protocols configured for output. Can
be Telnet, SSH, or both Telnet and SSH.
•EXEC Timeout—Number of seconds of inactivity after which a session is
terminated.
•Inbound Access-class—Name or number of the access rule applied to the
inbound direction of the line range.
•Outbound Access-class—Name or number of the access rule applied to the
outbound direction of the line range.
•ACL—If configured, shows the ACL associated with the vty connections.
•Authentication Policy—The AAA authentication policy associated with this
vty line. This field is visible if AAA is configured on the router.
•Authorization Policy—The AAA authorization policy associated with this
vty line. This field is visible if AAA is configured on the router.
Note To use SSH as an input or output protocol, you must enable it by clicking SSH in
the Additional Tasks tree and generating an RSA key.
Edit vty Lines
This window lets you edit virtual terminal (vty) settings on your router.