12-23
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter12 Easy VPN Remote
Administering Easy VPN Remote Connections
Add or Edit Easy VPN Remote
Use this window to configure your router as an Easy VPN client. Your router must
have a connection to an Easy VPN concentrator or server on the network.
Note This window appears if the Cisco IOS image on your ro uter supports Easy VPN
Client Phase II.
The Cisco Easy VPN Remote feature implements the Cisco Unity Client protocol,
which allows most VPN parameters to be defined at a VPN remote access server.
This server can be a dedicated VPN device, such as a VPN 3000 concentrator or
a Cisco PIX Firewall, or it can be a Cisco IOS router that supports the Cisco Unity
Client protocol.
Note • If the Easy VPN server or concentrator has been configured to use XAuth, it
requires a username and password whenever the router establishes the
connection, including when you deliver the configuration to the router, and
when you disconnect and then reconnect the tunnel. Find o ut whether XAuth
is used and the required username and password.
•If the router uses Secure Shell (SSH) you must enter the SSH login a nd
password the first time you establish the connection.
Field Reference
Table12-8 describes the fields in this screen.
Table12-8 Add or Edit Easy VPN Remote Fields
Element Description
Name Enter a name for the Easy VPN remote configuration.
Mode]
Client Choose Client if you want the PCs and other devices on the router’s
inside networks to form a private network with private IP addresses.
Network Address Translation (NAT) and Port Address Translation
(PAT) will be used. Devices outside the LAN will not be able to ping
devices on the LAN or to reach them directly.