Cisco Systems 2.5 Add or Edit a Management Policy

31-19
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter31 Router Properties
vty Settings
Discard Changes Button
Click to discard changes you made in the Add or Edit a Management Policy
window to the router configuration. The changes you made are discarded and
removed from the Configure Management Access Policies window.
Add or Edit a Management Policy
Use this window to add or edit a management policy.
Type
Specify whether the address you provide is the address of a host or a network.
IP Address/Subnet Mask
If you specified Network in the Type field, enter the IP address of a host, or the
network address and subnet mask. For more information, see IP Addresses and
Subnet Masks.
Interface
Choose the interface through which you want to allow management traffic. The
interface should be the most direct route from the host or network to the local
router.
Management Protocols
Specify the management protocols allowed for the host or network.
Allow SDM
Check to allow the specified host or network to access Cisco SDM. When you
check this box, the following protocols are automatically che cked: Telnet, SSH,
HTTP, HTTPS, and RCP. Checking this option does not prevent you from
allowing additional protocols.