Chapter12 Easy VPN Remote
Administering Easy VPN Remote Connections
12-20
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
This button is labeled Login if all of the following are true:
•The Easy VPN server or concentrator being connected t o uses
XAuth.
•The XAuth response is set to be requested from Cisco SDM or
the router console.
•The tunnel is waiting for XAuth credentials (the connection has
been initiated).
Click Login to login to the Easy VPN server and establish the
connection.
If the connection is set to automatic or traffic-based tunnel control,
this button is disabled.
Status
The connection is up. When an Easy VPN connection is up, the
Disconnect button enables you to deactivate the connection if
manual tunnel control is used.
The connection is down. When an Easy VPN connection is down,
the Connect button enables you to activate the connection if manual
tunnel control is used.
The connection is being established.
Xauth Required—The Easy VPN server or concentrator requires an
XAuth login and password. Use the Login button to enter the login
ID and password and establish the connection.
Configuration Changed—The configuration for this connection has
been changed, and needs to be delivered to the router. If the
connection uses manual tunnel control, use the Connect button to
establish the connection.
Name The name given to this Easy VPN connection.
Table12-7 Edit Easy VPN Remote Fields
Element Description