Chapter12 Easy VPN Remote
Administering Easy VPN Remote Connections
12-22
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Tunnel Activation The value is Auto, Manual, or traffic-based.
If the connection is configured with the Manual setting, you must
click Connect to establish the tunnel, but you can start or stop the
tunnel at any time by clicking Connect or Disconnect.
If the connection is configured with the Auto setting, the VPN
tunnel is established automatically when the Easy VPN
configuration is delivered to the router configuration file. However,
the Connect or Disconnect button is not enabled for this connection.
If the connection is configured with the traffic-based setting, the
VPN tunnel is established automatically when inside traffic
qualifies for outside routing. However, the Connect or Disconnect
button is not enabled for this connection.
Backup Connection A backup Easy VPN remote connection that has been set up.
Backup connections are configured in the Cisco SDM Interfaces
and Connections task.
XAuth Response Method If XAuth is enabled, the Item Value column shows one of the
following about how the XAuth credentials are sent:
•They must be entered from Cisco SDM or the router console.
•They must be entered from a PC browser when browsing.
•The credentials are automatically sent because they have been
saved on the router.
Identical Addressing Interface If identical addressing is configured, the Item Value column
displays the word Configured,” and the name, IP address, and
number of subnet bits for the interface, for example, Loopback1
(20.20.20.1/24).
Split DNS If split DNS is configured, the Item Value column displays the word
Enabled, and the following information:
•Domain names sent to corporate DNS servers
•Corporate DNS servers pushed from Server
•Internet DNS servers
Multiple values are separated by commas.
Table12-7 Edit Easy VPN Remote Fields
Element Description