Cisco Systems 2.5 Date & Time, IP CEF Setting, Refresh, IDS NM Initial Setup

Chapter28 Network Mo dule Management
IDS Network Module Management
28-6
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Date & Time
IP CEF Setting
IDS NM Initial Setup
For more information on configuring the IDS module, refer to the documents at
the following link.
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids10/index.htm
Refresh
If this row contains an X icon in the Action column, the router’s clock
settings have not been configured. Double-click on this row, and enter time
and date settings in the Date and Time Properties window.
If this row contains an X icon in the Action column, Cisco Express
Forwarding (CEF) has not been enabled on the router. Double-click on this
row, and click Yes to enable IP CEF on the router.
If this row contains an X icon in the Action column, Cisco SDM has
detected that the IDS Network Module’s default IP address has not been
changed. Double-click on this row, and Cisco SDM will prompt you to
open a session to the IDS module and complete configuration.You can use
Telne t or SSH for this session.
After you have fixed configuration settings, you can click this button to
refresh the checklist. If an X icon remains in the Action column, a
configuration setting has still not been made.