7-5
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter7 Wide Area Application Services
WAAS Reference
Field Reference
Table 7 -1 describes the information in the NM WAAS tab.
Table7-1 NM WAAS Tab
Element Description
Registration status with the WAAS
central manager
Cisco SDM shows one of the following:
•Active—The Edge WAE is registered with the WAAS
central manager. Cisco SDM displays a green icon when
the Edge WAE is registered.
•Inactive—The Edge WAE is not registered with the
WAAS central manager. Cisco SDM displays a red icon
when the Edge WAE is not registered.
Register To log on to the CM and register the Edge WAE on the router,
click Register.
Note Do not attempt to register until you have configured
the WAAS NM, and entered the Cisco IOS CLI
commands noted at the beginning of this help topic.
Refresh To refresh the registration status, cl ick Refresh. Cisco SDM
displays a username and password dialog to allow you to
login to the CM.
To configure the WAAS device.... To launch the central manager device manager, click on the
displayed link.
WAAS Configuration
WAAS Interface The name of the WAAS network module; for example,
Integrated Service Engine 0/0.
Router IP address The IP address of the router interface to the service module.
This is the IP address of the Redirect interface.
Service Module Internal IP Address The internal IP address assigned to the service module.
Service Module External IP Address (Optional). The external IP address assigned to the service
module.
Default Gateway The default gateway IP address used by the service module.
WCCP Protocol Settings