Cisco Systems 2.5 Address Pools

26-15
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Chapter26 Network Addres s Translation
Network Address Translation Rules
Action
Either permit or deny. Route maps created by Cisco SDM are configured with the
permit keyword. If this field contains the value deny, the route map was created
using the CLI.
Access Lists
This area shows the access lists associated with this entry. The route map uses
these access lists to determine which traffic to protect from NAT translation.
To Edit an Access List in a Route Map Entry
Choose the access list, and click Edit. Then edit the access list in the windows
displayed.
Address Pools
The Address Pools window shows the configured address pools that can be used
in dynamic NAT translation.
Pool Name
This field contains the name of the address pool. Use this name to refer to the pool
when configuring a dynamic NAT rule.
Address
This field contains the IP address range in the pool. Devices whos e IP addresses
match the access rule specified in the Add Address Translation Rule window will
be given private IP addresses from this pool.