Cisco Systems 2.5 Warning Messages

Chapter12 Easy VPN Remote
Administering Easy VPN Remote Connections
12-38
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Warning Messages
Cisco SDM displays a warning message when you click OK if it detects any of
the following problems:
•There are no devices added.
•If you enter an IP address for the non accessible devices that is already used
by a router interface.
•If you enter an IP address for the non accessible devices that is already used
as a global IP address for an accessible device.
Add Clicking Add displays the dialog that enables you to configure a
loopback interface.
Enable split tunneling Split tunneling enables the router to only use the VPN tunnel to send
traffic to network addresses given to it by the Easy VPN server and
to send other traffic through the Internet. To enable the router to use
this feature, click Enable split tunneling.
Accessible Devices
Device Local IP The local IP address of a device that is identified as a device that
must be reached by other networks.
Device Global IP The global IP address given to a device that is identified as a device
that must be reached by other networks. Because the global IP
address for each device must be routable from the Easy VPN server,
you must obtain these addresses from the Easy VPN server
administrator. Each IP address must be on the same subnet, and one
address must be reserved for use by non accessible devices on the
local network.
Add To add the local IP address and global IP address of a device, click
Add.
Edit To change the IP address information for a device, choose an entry
and click Edit.
Delete To remove an entry for an accessible device, choose the entry and
click Delete.
Table12-15 Identical Addressing Tab Fields (continued)
Element Description