Chapter27 Cisco IOS IPS
Edit IPS
27-10
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
SDEE Messages Button
Secure Device Event Exchange (SDEE) messages report on the progress of Cisco
IOS IPS initialization and operation. Click to display the Edit IPS: SDEE
Messages window, where you can review SDEE messages and filter them to
display only error, status, or alert messages.
Signatures Button
Click to display the Edit IPS: Signatures window where you can manage
signatures on the router.
NM CIDS Button
This button is visible if a Cisco Intrusion Detection System network module is
installed in the router. Click to manage the IDS module.
Edit IPS: IPS Policies
This window displays the Cisco IOS IPS status of all router interfaces, and allows
you to enable and disable Cisco IOS IPS on interfaces.
Interfaces
Use this list to filter the interfaces shown in the interface list area. Choose one of
the following:
•All interfaces—All interfaces on the router.
•IPS interfaces—Interfaces on which Cisco IOS IPS has been enabled.
Enable Button
Click to enable Cisco IOS IPS on the specified interface. You can specify the
traffic directions to which Cisco IOS IPS is to be applied, and the ACLs used to
define the type of traffic you want to examine. See Enable or Edit IPS on an
Interface for more information.
Edit Button
Click to edit the Cisco IOS IPS characteristics applied to the specified interface.