Cisco Systems 2.5 Save SDF to PC, Exit, Unable to perform squeeze flash

Chapter43 File Menu Commands
Save SDF to PC
43-6
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
Enter the name of the new folder in the Folder Name field. The path to the location
of the new folder is displayed above the Folder Name field.
Save SDF to PC
If you are working in IPS, you can save the signature definition file (SDF) t hat
you are working on to your PC. Navigate to the directory in which you want to
save the file, and click Save.
Exit
Exits Cisco Router and Security Device Manager.
Unable to perform squeeze flash
This window appears when your router is unable to perfo rm a squeeze flash
operation because an erase flash: operation has never been performed on the
router. This help topic explains how to download the files you need before
performing the erase flash: operation, how to execute erase flash:, and how to
load files back onto the router and reconnect to Cisco SDM afterward.
Executing the erase flash: command will remove Cisco SDM and the Cisco IOS
image from the router's Flash memory, and you will lose your connection to the
router. You should print the contents of this help topic so that you can use the
instructions to obtain a Cisco IOS image and SDM.tar from Cisco.com, and install
them on the router.
Step1 Ensure that the router will not lose power. If the router loses power after an
erase flash: operation, there will be no Cisco IOS image in memor y.
Note If the router does lose power after the erase flash operation, you can use
the procedure at the following link to recover:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis37
00/sw_conf/37_swcf/appendc.htm#xtocid11