Cisco Systems 2.5 IP Network List, Available Interface List, Make Interface Passive

Chapter25 Routing
Add or Edit an OSPF Route
25-6
Cisco Router and Security Device Manager 2.5 User’s Guide
OL-4015-12
IP Network List
Enter the networks that you want to create routes to. Click Add to add a network.
Click Delete to delete a network from the list.
Network
The address of the destination network for this route. For more information, refer
to Available Interface Configurations.
Mask
The subnet mask used on that network.
Area
The OSPF area number for that network. Each router in a particular OSPF area
maintains a topological database for that area.
Note If SDM detects previously configured OSPF routing that includes “area”
commands, then the IP Network List table will be read-only and cannot be edited.
Available Interface List
The available interfaces are shown in this list.
Make Interface Passive
Check the box next to the interface if you do not want it to send updates to its
neighbor. The interface will still receive routing updates, however.
Add
Click Add to provide an IP address, network mask, and area number in the IP
address window.
Edit
Click Edit to edit the IP address, network mask, or area number in the IP address
window.